APEX BP ELECTROFISHER LITH COMBO

Part # 12036

Apex electrofishers are transforming fisheries research. You asked us for data and standardization and we listened. Apex electrofishers record electrofishing inputs and outputs every second while displaying them on a beautiful color LCD screen. This combo package includes the electrofisher, battery and charger, electrode pole, electrode ring, cathode and wheeled travel case.
Ask a Question

$11,975.00

With more than 50 years of building electrofishers under our belt, we pulled out all the stops when designing the Apex. Dual Channel Outputs, Power Standardization Mode, Widest Electrical Output Ranges, Timer Alarm, Help Tutorials, Diagnostic Mode, Animated Waveform, Trend Graphs, GPS Coordinates, Battery Meter, Data Recording, Data Download, User Performed Software Upload, and more.

What's Included

  • Apex Backpack Electrofisher
  • Adjustable Shoulder Harness
  • 6 ft. 2-Piece Electrode Pole (07575)
  • 11 in. Adjustable Aluminum Electrode Ring (07613)
  • Rat-tail Cathode (06821)
  • 24V 9.6Ah Lithium Battery (10765)
  • UBC-24 Battery Charger (10167)
  • Wheeled Travel and Storage Case (09632)
  • Voucher for free Electrofishing Principles and Safety Certification Course
Output Power 400W continuous, 47,000W peak
Output Voltage 50 to 1,200V in 1V steps
Output Frequency 0 to 1,000Hz in 1Hz steps
Duty Cycle 0% to 100% in 1% steps
Output Current 40A peak max, 4A continuous at 100V
Output Waveforms Smooth DC, Pulsed DC, Burst of Pulses DC
Waveform Storage Save voltage, frequency, duty cycle, and pulse type for 12 different waveforms
Operational Duty Cycle 40% Max. (192 seconds on 288 seconds off) at 40C ambient 400VA output
Overload Protection Excessive peak current, average current or over-temperature will shutdown the unit before damage can occur. Resets automatically when condition is corrected
Output Indicator Audio tone for 30VDC and greater and increasing pulse rate for output power, Flashing red light, Animated output waveform, Charted displays for output voltage, current, power, and % load. Diagnostic screen shows all inputs and outputs, including peaks and averages
Metering Peak and average output current, Peak and average output voltage, Peak and average output power, Battery voltage, Battery current, Battery fuel gauge, Timer and alarm, Waveform settings, Case temperature, Heat sink temperature, Percentage load, Error messages, Fault conditions
Output On Timer 0 to 999,999 seconds, resettable via menu
Environmental Requirements Operational altitude: -400 to 3000 meters
Relative humidity: 10% to 90% noncondensing
Operating temperature: 0 to 40 C
Storage temperature: -15 to 50 C
Construction Sealed molded polyethylene and ABS case NEMA 4, IP 65
Safety Devices Output indicator
Tilt switch: Forward 50, backward 40, sideways 45 all 10
Immersion sensor
Electrode out of water sensor
Electode pole switch
Emergency stop switch
Battery compartment interlock
Battery fuseable link
Electrodes 6 ft. 2-piece pole, 6 ft. 1-piece pole; 6 in., 11 in., 18 in. aluminum ring, 11 in. stainless steel ring; stainless steel trailing cathode
Battery Choice of 24V batteries
Battery Life 40 minutes continuous at 100W with 7Ah battery
Size and Weight Height: 27.5 in (69.9 cm)
Width: 14.5 in (36.9 cm)
Depth: 14.5 in (36.9 cm)
Weight: 20.35 lb. (9.23 kg) without battery or accessories

Specifications subject to change without notice.

For more information, please visit this product's webpage.