Sale priceContact for price


The Apex Lite Backpack Electrofisher is perfect for field work with its lightweight design and advanced technology. Featuring GPS and data collection capabilities, it streamlines the standardization process. Carry and collect data with ease and efficiency.

The Apex Lite can be ordered with either Lead-acid or light-weight lithium iron batteries. Combo packages with everything needed to begin electrofishing are available and include:

  • Apex Lite Backpack Electrofisher
  • Adjustable Shoulder Harness
  • 6 ft. 2-Piece Electrode Pole
  • 11 in. Adjustable Stainless-steel Electrode Ring
  • Rat-tail Cathode
  • (1) 24V 9+Ah Lithium Battery or (1) 24V 7Ah Battery
  • UBC-24 Battery Charger
  • Voucher for Electrofishing Principles and Safety Certification Course ($500 value)

Click "Contact for price" to start a conversation with our friendly sales team.

Output Power 400W continuous, 47,000W peak
Output Voltage 50 to 1,200V in 1V steps
Output Frequency 0 to 1,000Hz in 1Hz steps
Duty Cycle 0% to 100% in 1% steps
Output Current 40A peak max, 4A continuous at 100V
Output Waveforms Smooth DC, Pulsed DC, Burst of Pulses DC
Waveform Storage Save voltage, frequency, duty cycle, and pulse type for 12 different waveforms
Operational Duty Cycle 40% Max. (192 seconds on 288 seconds off) at 40°C ambient 400VA output
Overload Protection Excessive peak current, average current or over-temperature will shutdown the unit before damage can occur. Resets automatically when condition is corrected
Output Indicator Audio tone, Flashing red light, Dynamically plotted output waveform, Charted displays for output voltage, current, power, and % load. Diagnostic screen shows all inputs and outputs, including peaks and averages
Metering Peak and average output current, Peak and average output voltage, Peak and average output power, Battery voltage, Battery current, Battery fuel gauge, Timer and alarm, Waveform settings, Case temperature, Heat sink temperature, Percentage load, Error messages, Fault conditions
Output On Timer 0 to 999,999 seconds, resettable via menu
Environmental Requirements Operational altitude: -400 to 3000 meters
Relative humidity: 10% to 90% noncondensing
Operating temperature: 0° to 40° C
Storage temperature: -15° to 50° C
Construction Sealed molded polyethylene and ABS case NEMA 4, IP 65
Safety Devices Output indicator
Tilt switch: Forward 50°, backward 40°, sideways 45° all ± 10°
Immersion sensor
Electrode out of water sensor
Electode pole switch
Emergency stop switch
Battery fuseable link
Battery Choice of 24V lithium or lead-acid batteries
Battery Life 40 minutes continuous at 100W with 7Ah lead-acid battery
Size and Weight Height: 23.3 in (59.18 cm)
Width: 14.5 in (36.8 cm)
Depth: 8.5 in (21.5 cm)
Weight: 17.9 lb. (8.12 kg) without battery or accessories
Specifications subject to change without notice.

Recently viewed