eDNA Sampler one-time-use glass fiber filter packet for each sampling location, containing:
- Preloaded, openable inline filter housing
- Single use forceps for filter membrane removal
- Tubing extension for filter housing
Smith-Root eDNA filter packets are custom designed to maximize the filterable water volume in eDNA studies and help improve species detection sensitivity. The inverted filtration orientation and mechanical design maximize eDNA particle concentration on the membrane filter. A range of pore sizes are available for different environmental conditions.
|Operational vacuum pressure||0 to 12 psi (-24.4 inHg)|
|Operational temperature (ambient)||0 to 40° C|
|Pump tubing connection||0.25 inch ID, 0.5 inch OD silicone tube|
|Filter membrane material||GFF|
|Filter pore size||1.5 µm|
|Sterilization||Not gamma sterilized (clean-room assembly)|
|Suggested filtration volume||1 to 10 L|
|Storage temperature (air)||22° C|
|Pre-filtration storage||Closed cardboard box|
|Post-filtration storage||User-identified preservation method|
Smith-Root eDNA filters are covered by our exceptional warranty service. If the filter does not perform within specifications (e.g. air leakage < 12 psi) we will replace the filters at no charge to you within one year of purchase. Guarantee applies to appropriate use of the filters with the Smith-Root eDNA Sampler system or approved pump.
Note: Small, slow-moving bubbles in the suction tubing may occur at high pressures (> 10 psi) and are caused by dissolved gases coming out of solution under vacuum pressure. This is normal and does not indicate leaking. Large, fast-moving air bubbles should not be observed under normal circumstances. Please contact Smith-Root technical support if you have questions.