Description
Convenient 25 or 100-count case of eDNA one-time-use filter packs, containing:
- (25 or 100) Preloaded, openable inline filter housing
- (25 or 100) Single use forceps for filter membrane removal
- (25 or 100) Tubing extension for filter housing
Smith-Root eDNA filter packets are custom designed to maximize the filterable water volume in eDNA studies and help improve species detection sensitivity. The inverted filtration orientation and mechanical design maximize eDNA particle concentration on the membrane filter. A range of pore sizes are available for different environmental conditions.
Satisfaction Guaranteed
Smith-Root eDNA filters are covered by our exceptional warranty service. If the filter does not perform within specifications (e.g. cannot reach 10 PSI or your pressure set limit, if set at 10 PSI or less), we will replace the filters at no charge to you within one year of purchase. Guarantee applies to appropriate use of the filters with the Smith-Root eDNA Sampler system or approved pump.
Note: Under high pressure, air leakage and bubbles in the suction tubing are possible. This does not impact filtration efficiency or volume filtered. Please contact Smith-Root technical support if you have questions.
| Operational vacuum pressure | 0 to 12 psi (-24.4 inHg) |
|---|---|
| Operational temperature (ambient) | 0 to 40° C |
| Pump tubing connection | 0.25 inch ID, 0.5 inch OD silicone tube |
| Filter membrane material | PES (call for additional options) |
| Filter pore size | 0.45 µm,1.2 µm, 5.0 µm (call for additional options) |
| Sterilization | Not gamma sterilized (clean-room assembly) |
| Suggested filtration volume | 1 to 10 L |
| Storage temperature (air) | 22° C |
| Pre-filtration storage | Closed cardboard box |
| Post-filtration storage | User-identified preservation method |